Each SDH-300 Bacteria Block is packaged in a mesh sack allowing it to be suspended from a rope into the treatment area. Slow release formulation disperses as product dissolves in wastewater, sump, lift station or pit. Includes micronutrients, macronutrients, and biological enhancers.
General Dosing Instructions
Simply suspend the block into the treatment area, lift station, sump or other process allowing the block to be placed just away from the higher flow areas. The block will dissolve over a 30-120 day period as the waste water flow washes over it. Higher flows will result in faster degradation of the block.
| Sump/Tank Capacity | Block Size |
|---|
| 1,000 Gallons |
2 LB |
| 5,000 Gallons |
5 LB |
| 10,000 Gallons |
10 LB |
| Over 10,000 Gallons |
Graduated Multiples |
Wastewater and Effluent Handling Facilities:
Position block(s) just outside the flow area.
Lift Stations:
Ensure that the block remains submerged even when wastewater is pumped to the lowest float level
- When locating the block in the sump, DO NOT place block directly into the flow of incoming waste. The turbulance and “washing effect” will greatly reduce the longevity of this product. Ideally, the block should be placed in a less turbulant area of the sump, but not in a dead spot.
- If a grease shelf is present during placement of block, it is recommended to raise the high level flow so that the bacteria can attack the grease shelf from the top, bottom and sides.
- Results should be obtained in four to eight weeks from the time of application. If grease shelves are present at the time of application, a longer period of time may be required to obtain results.
Uses and Applications
- Sumps
- Lift Stations
- WWT
- Holding Tanks
- Grease Applications
- Lagoons
